What do tandem bicycles, exoskeletons and ARM processors have in common? They're all helping in the fight against Parkinson's.
A bicycle made for two
The discovery came during a roadtrip across Iowa. Dr Jay Alberts was working in the Biomedical Engineering Department at the Cleveland Clinic, Ohio, when he volunteered to take a friend with Parkinson's on a week-long tandem ride across the American heartland. His motivation was simple: to demonstrate how an active lifestyle could, and should, be maintained after diagnosis.
To prepare, his friend trained for the trip on an exercise bike, pedalling at a steady rate of 60rpm. However, the trip provided her with an unexpected challenge: the tandem's shared drive chain forced her to pedal roughly 40% faster in order to match Alberts' swifter 85 rpm. Just two days into the trip, they were both surprised to notice that her symptoms had improved.
Significantly, the improvements were evident in the upper body, not just in the muscles that had done the pedalling. This was evidence that the assisted exercise had led to beneficial changes in the brain.
A spin class - with a robotic twist
"Sensors in the electro-mechanical legs detect the how hard the wearer is pushing on the pedals, and automatically adjust how much assistance to give."
It's not about the bike
Building a powered machine that interacts intimately with the movement of a human being isn't easy. The motorised limbs have to accurately track and mimic the kinematics of the hip, knee and ankle joints, so sensitive control mechanisms must be in place. After all, nobody will want to wear the device if it could manipulate their legs in an unsafe way.
"The exoskeleton has sensors to measure the loads, angles and pitch at each joint, and to constantly monitor the pressure bearing down on each pedal."
Read more: http://www.alphr.com/life-culture/1001327/shut-up-legs-fighting-parkinsons-with-cycling-and-robotics#ixzz3iSCUAJqm
http://health.einnews.com/article/280338072/G7fPrIey91b9zYwL
No comments:
Post a Comment